High Flange Front

Tripp Lite's PDUMH20 AC power distribution unit offers a digital current monitor and provides 20 amps of 120 volt capacity in a versatile multi-mount cabi. Detachable mounting flanges are configurable for wallmount under-counter or 1U/0U rackmount installation. Uses only 1U of rack space when installed in any 19-inch rack with the potential for zero U mounting in the cable management area of most rack enclosures. Built-in digital ammeter display offers continuous visual power consumption data for the entire PDU. Attractive rackmount housing with 12 rear-facing outlets measures only 4.5 inches in depth. Unfiltered electrical pass-through without a power switch makes the PDUMH20 ideal for distributing alternate waveform UPS or generator power in rack enclosures work closets and more. Includes 12 rear-facing NEMA 5-15/20R outlets 15-ft. AC power cord with L5-20P input plug. Comes wih 6-inch L5-20P-to-5-20P adapter 20 amp breaker TVSS grounding lug and rugged all-metal rackmount case design.Primary InformationPower Device Type :  Power distribution unit Voltage Provided :  120 V AC Voltage Required :  120 V AC Power Provided (W) :  N/A Power Device / Form Factor :  Rack-mountable Input Connector(s) :  NEMA L5-20P Output Connector(s) :  12 x NEMA 5-15/20R Width :  17.5 Inch Depth :  4.5 Inch Height :  1.75 Inch UNSPSC CodeUNSPSC Code :  39121017 

Harness your vehicle''s battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 3000 watts of 120V AC power to 4 AC outlets from any 12V battery or automotive DC source. Includes a PV remote and 25 feet of cable. Super-compact, lightweight metal case design is among the smallest, most rugged inverters available at this power level.

mfr: Kohler 60"×42½"×22¾"Bath depth: 17½"5 factory-installed, color-matched plastic ProFlex® hydro-massage jets1¼ hp pumpIntegral round-front apron5" high molded-in wainscotIntegral tile flange on three sides for alcove installationUL listedOptional accessories:K9695 Trim kitK1639 20 minute timer kitK1491 PillowK1601 FootstopRecommended accessories:K7161-AF Bath drain Material : PlasticUL Listed : YesWidth : 42.5 inLength : 59.75 inColor : BiscuitHeight : 22.75 inColor Category : Shades of White

Harness your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 1250 watts of 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a set of high current DC input terminals for simple permanent installation. Highly reliable large transformer design specializes in powering motors and other inductive loads with high-current startup needs. PowerVerter Plus Inverters acmodate "peak surge" demands by delivering more output power than their continuous rating. Compare the "Continuous" and "Peak Surge" wattage ratings and you'll find PowerVerter Plus Inverters supply up to double their output to easily handle equipment start up and motor cycling requirements. A DoubleBoost feature provides up to 200% of the continuous output for up to 10 seconds providing the extra power needed to cold start heavy-duty tools and equipment. An OverPower feature delivers up to 150% of the continuous output for up to 1 hour. Primary InformationPower Device Type :  Power converter Power Device / Form Factor :  External Voltage Provided :  AC 120 V +/- 5% Voltage Required :  12 V Power Provided :  1.25 kW Input Connector(s) :  2 Output Connector(s) :  2 x power NEMA 5-15 Enclosure Color :  Black Width :  8.7 Inch Depth :  9 Inch Height :  7 Inch UNSPSC CodeUNSPSC Code :  39121006 

Harness your vehicle''s battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 1800 watts of 120V AC power to 4 AC outlets from any 12V battery or automotive DC source. Includes a set of nut-and-bolt style DC terminals for simple installation. Super-compact, lightweight metal case design is among the smallest, most rugged inverters available at this power level.

2U 15" Vented Eco Shelf, are designed to complement any racking system with weight capacity of 40lbs

The choice for discriminating professionals and audiophiles, the SE535 utilizes Triple High-Definition MicroDrivers for incredibly spacious sound with rich bass. Evolved from personal monitor technology road-tested by pro musicians and fine-tuned by Shure engineers, SE535 earphones deliver an unparalleled listening experience allowing you to hear the details of your music like never before. The SE535 utilizes dedicated dual woofers and a single tweeter to deliver unparalleled sound with defined bottom end. Sound isolation technology prevents outside noise from interfering with your audio experience, whether on-stage or on-the-go. Ergonomic, Professional Design Lightweight, low-profile shape with optimized nozzle angle is designed to rest comfortably in the ear. Over-the-ear configuration keeps cables out of the way. Detachable Cable with Wireform Fit.

Tripp Lite's PDU1230 offers 208/240V power distribution with L6-30P input plug 15-foot cord and 14 total output receptacles. It features 2 front-panel C19 outlets each protected by separate 15A circuit breakers and 12 rear-panel C13 outlets protected in banks of 4 by 3 separate 10A circuit breakers. Detachable mounting flanges are configurable for wallmount under-counter or 1U/0U rackmount installation.Primary InformationPower Device Type :  Power distribution strip Voltage Provided :  AC 208/240 V Voltage Required :  AC 208 V V Power Provided (W) :  N/A Circuit Protection :  Circuit breaker Power Device / Form Factor :  External Input Connector(s) :  Power NEMA L6-30 Output Connector(s) :  12 x power IEC 320 EN 60320 C13 2 x power IEC 320 EN 60320 C19 Width :  17.5 Inch Depth :  4.5 Inch Height :  1.75 Inch Compliant Standards :  Tested to UL60950-1 (USA) CSA-C22.2 (Canada) Service & Support Type :  Lifetime warranty Features :  Cables Included: 1 x power cable - 15 ft UNSPSC CodeUNSPSC Code :  39121017 

Throw the brand-new DS12L7 into the Solo-Baric L7 Sub Box lineup--the first dual-woofer box to transport the extreme Solo-Baric L7 Subwoofer--and you've got a bass bonanza of enclosure choices for whatever the need. One dual-sub box, two single ones, one slim-profile box made especially for pickup trucks, and all vented provide the biggest KICKER bass available. Some of the toughest sub boxes money can buy. Click to enlarge. Combo vent/terminal cup. Click to enlarge. Carbon fiber look vinyl face with embroidered KICKER logo. Click to enlarge. An extra-tough, carbon-fiber look lines the front of the newest KICKER solid-wood boxes, which also sport an embroidered KICKER logo for an intense-looking enclosure. Ten- and 12-inch, new-in-2008 Solo-Baric L7 Subwoofers, redesigned with additional heat dissipation and full-coverage back bracing, are fortified even further within the box. It makes for some of the toughest sub boxes money can buy. All four models of Solo-Baric L7 Sub Boxes feature the custom-designed, combo vent/terminal cup, where the impedance designator (2- or 4-Ohm) and oversized port share the same space. KICKER VS10L7 Features L7 performance in a factory designed enclosure Large diameter, high flow ports with custom flange and terminal cup Carbon fiber look vinyl face with embroidered KICKER logo Heavy duty gray carpet What's in the Box VS10L7 subwoofer box (2-ohm impedance), Mounting brackets and hardware, User's manual

STILLWATER DESIGNS KICKER 10" SOLO BARIC SINGLE S