Posted by admin in Thanks for visiting our site!
Mountain Bicycle Rim
Checkout Ebay Auctions For The Cheapest Prices
 |
 SYNCROS MOUNTAIN BIKE MTB RIM/WHEEL/TUBE TAPE STRIP/LINER 26"  US $.99
|
 KORE 26" MOUNTAIN BICYCLE RIM STRIP WHEEL TAPE 26mm NEW US $6.95
|
| Powered by phpBay Pro |
Check out Amazon:
| Account limit of 2000 requests per hour exceeded. |
Featured Article:
Essentials Of The Bicycle Wheels
The article refers to the different contents of the bicycle wheels. It tries to explain the role that these important parts play in the smooth running of the wheels.
There is no better way to spend a weekend than to go on a leisurely ride on a bicycle on a quiet track in the woods. Bicycles have an old world charm about them and even in this fast-paced world has its own prominent place. Of all the parts of the bicycle, it is the bicycle wheels which are the most important ones. Bicycle wheels are the ones which carry the entire burden on them and thus need to be very carefully observed.
Types of Tires
Almost 99% of the bicycles have the clincher kind of tires. The clincher tires consist of an outer tire with a cross section which has a typical U - shape while there is another inner tube within the tire. Apart from these parts there are three key parts which create the tire. The first part is the Bead which is basically the rim of the tire. Normally, the beads contain hoops which are made up of steel wires which are very strong. The second very important part is the fabric. Tire manufacturers weave this cloth fabric between two beads to make the basic framework of the tire. The third major portion is the rubber. Rubber is used as an outer layer to the fabric. Rubber is used only after the basic framework is complete.
Apart from the clinchers, the bicycles also have wheels which are known as tubular tires. Unlike the clinchers, the tubular tires do not have any beads. In the tubular tires, the two rims of the tires are actually stitched together around the inner tube.
Other Tire Aspects
Bicycle tires have a part called traction. This traction is basically the resistance capacity of the tires which avoid skidding or slipping. Another very important aspect of bicycle wheels is the width and pressure of the bicycle wheels. The width and pressure of the wheels are inversely proportional. This implies that if the width of the wheel is greater then it has a low pressure and if the width is not very wide then it has a high pressure. Also generally, the wheels are made up of two basic types of rubber, namely natural latex rubber and butyl.
There are several other points apart form the features mentioned above. However, these are the most important features which make up the basic framework of the wheels of the bicycle and without which the wheels cannot work.
About the Author
Alastair Hamilton use to write for http://www.bikecyclingreviews.com .For additional information on truing a bike wheel subjects follow this link bicycle wheels
What do I need to convert my bicycle to disc brakes?
I have a 26" Specialized Mountain bike with v'brake system. I need new rims but it is hard to find rims for this old system.
You not only need hubs that accept a rotor you need the mounts for the caliper on the fork and stay in the back. If you don't have the mounts -- forget it. The rims as you put it would be complete wheels, and you don't mention the age of the bicycle. If it has a cassette then newer wheel fitting won't be a problem.
As I stated before the mounts for the calipers are you biggest hurdle.
If you just gotta have disks, start shopping a new bike.
All aboard the Rocky road
I was overwhelmed.
Thanks for visiting!
