Posted by admin in Thanks for visiting our site!
Nut Set Anodized
Checkout Ebay Auctions For The Cheapest Prices
 |
 MAZDA TOYOTA HONDA ACURA 12X1.5mm LUG NUTS x16 ANODIZED CNC ALUMINUM RED  US $39.99
|
 12X1.5mm LUG NUTS x16 ANODIZED CNC ALUMINUM GREEN MAZDA TOYOTA HONDA ACURA US $39.99
|
| Powered by phpBay Pro |
Check out Amazon:
 |
Delta Axlerodz Bolt On Bicycle Skewers (1 Pair) List Price: $14.99 Sale Price: Too low to display  |
|
Delta Axle Rodz Quick Release Skewer PairsItem SpecificationsColorSilverShaftCrMoSkewer UseRearItem Specifications- FrontColorSilverShaftCrMoSkewer UseFrontFront Axle Type9x1Item Specifications- RearColorSilverRear Axle Type10x1 |
 |
Commando Precision File Handle with 6 Mini Needle Files Stored Inside the Clear Anodized Pro Series Handle List Price: $13.95 Sale Price: $13.95 |
|
Handle (utilized as holder to store files inside and help prevent loss) has Non-Slip Finger Grip surface on body, chuck nut and cap to aid in removing or replacing tools and for positive control during tool use. Simply loosen chuck nut to remove or replace files. All machined parts are plated or made of materials to help prevent rust & corrosion. Handles & Holders Made In USA. Files imported from other countries. (Des.Pat.No. D407,289) >>SUGGESTED USED: Service and repair Jewelry, Electronic Components, Guns, Clocks, Appliances, Automotive and RV's - Tool & Die making - Deburring, smoothing, filing and shaping metal, wood & plastic - Model building - Gifts |
 |
Commando Precision Pocket Optical Eyeglass Screwdriver with Double Ended Flat Screwdriver Blade (Stores Inside Blue Anodized Handle) Plus 4 Assorted Screws, All Items Stored Inside Plastic Tube for Carrying in Pocket or Purse List Price: $15.45 Sale Price: $15.45 |
|
SCREWDRIVER with 4 ASSORTED EMERGENCY EYE GLASS REPAIR SCREWS, to fit most eye glasses, stored inside separate small tube to prevent spilling. Handle (utilized as holder to store screwdriver blade inside to help prevent loss) has Non-Slip Finger Grip surface on body, chuck nut and cap to aid in removing or replacing blades and for positive control during tool use. Handle and screws fit inside plastic tube for easy storage in purse or pocket and square tube prevents rolling. Simply loosen chuck nut to reverse blade. Special cap helps prevent blade rattle. All machined parts are plated or made of materials to help prevent rust & corrosion. Made In USA (Des. Pat. No. D407,289) [CA65] |
 |
PBL LIGHT STANDS 10' PRO HEAVY DUTY SPRING CUSHIONED, ALL METAL LOCKING COLLARS SET OF 2 WITH CARRY BAGS BLACK FINISH by PBL List Price: $99.00 Sale Price: $59.99 |
|
This is a set of 2 PBL 10' spring cushioned photo studio professional heavy duty photography light stands, with metal locking collars plus carry bags. We also add 2 heavy duty sandbags. DO NOT BE FOOLED, YOU WILL NEED THESE SANDBAGS IF YOU EXTEND THESE STANDS UP TO 10', ASK ANY PRO. WE ARE THE ONLY PHOTO LIGHTING COMPANY THAT SUPPLIES SANDBAGS, WITH THEIR 10' STANDS, at no extra cost, FOR YOUR SAFETY. These professional stands are black anodized non-glare finish, aluminum tube construction, lightweight yet every strong. Extra wide footprint, that will hold strobes or continuous lights up to 15 lbs. Each stand is spring loaded, helps control lowing heavy loads. These 10' light stands will last for years. All metal locking collars, no plastic knobs like other light stands sold on eBay, that crack or strip from there metal studs in a short time. Rubber tips on legs to prevent movement. Each light stand comes with its on carry case. Keeps your stands looking new for years. Great addition to you studio lighing equipment. These stands and carry bags sell for over $79 each in professional camera stores. Sandbags are a must when using 10' light stands. Ask any pro, keeps the stand from toopling over and destroying your strobes or worst yet falling on your subject. We include these 2 heavyduty sandbags that are saddlebag designed, this design allows you to put the sandbag over your light stand leg making it very sturdy and almost impossible to topple over. With dual 10 1/4" x 9 1/4" interior compartments, these heavy duty bags can be filled and emptied over and over again with sand, gravel or even nuts and bolts. These sandlebags will prove to be an indispensable part of your studio system for years to come KIT INCLUDES: 2... Pro 10' light stands (8114) 2... Carry bags for stands, keeps your stands looking new 2... Sand bags |
 |
PHOTO VIDEO STUDIO LIGHTING KIT FLUORESCENT 1200 WATTS Steve Kaeser Photographic Lighting & Accessories List Price: $499.00 Sale Price: $269.95 |
|
This is a new PBL professional 1200 watt fluorescent lighting kit. Comes with 3 unique folding 24" x 24" softboxes. These softboxes set up in seconds by pushing the center ring over the fixture. No more hassle, no more rods to bend or lose. Quick and easy to set up. This is the perfect lighting kit for video or digital photography. This lighting kit is excellent for use in every type of photography from portrait to product. These kits are also great for use in digital video. Now you can get the professional images you want with all video or digital cameras. This is easy to work with and will give you professional images with every shot. Produces even soft light that renders natural skin tones without any filtration. These lights will not create hot spots like tungsten or strobes. This is what all the pros are using to get professional looking images. This lighting kit is used for high production work and can be left on all day without heating up your environment. Bulb life is rated at 10,000 hours. These bulbs are special daylight high output flicker-free photographic fluorescent bulbs made for video and digital cameras. You will get almost shadowless light that will wrap around your subject. This lighting kit is one of the most versatile you can own, puts out more power than units costing twice as much. Can be used for digital or video photography. Now you can have the latest in photographic lighting. Professional photographers, every major Hollywood studio and TV stations now use fluorescent lighting. Do they know something you should know? Now you can purchase photo fluorescent lighting for hundreds of $$ less than what they pay. |
 |
Blue Anodized Case Thumb Screw Set - 4 Pack Sale Price: $7.49 |
 |
Wheel Hub/Nut Set H.Anodized (2) GSCSTP20 |
|
Wheel Hub/Nut Set H.Anodized (2) |
 |
Motorcycle Wellnut Bolt Kit - Windscreen - Black - Honda CBR 600rr 1000rr, Suzuki GSXR 600 750 1000, Yamaha R1 R6 R6s, Kawasaki ZX6R ZX9R ZX10R ZX12R List Price: $14.95 Sale Price: $9.69 |
|
Set of 10 Motorcycle Windshield Bolts Well-nuts & Washers This kit will fit most Asian Sport-Bikes. They are usually used to install the windshield, many bikes also use them on the fairings like the Honda 600rr for example. Included are 10 Anodized Aluminum Bolts, 10 Rubber Well-nuts and 10 Plastic Washers. Affordable Set of 10 Bolts with Well-nuts and Washers Aluminum Bolts Very Light for those counting the grams Anodized for a durable, lasting finish Available in Red, Blue, Gold, Black, Titanium, Silver |
 |
Motorcycle Wellnut Bolt Kit - Windscreen & Fairing Spikes - Black - Honda CBR 600rr 1000rr, Suzuki GSXR 600 750 1000, Yamaha R1 R6 R6s, Kawasaki ZX6R ZX9R ZX10R ZX12R List Price: $34.95 Sale Price: $28.95 |
|
Set of 10 Black Motorcycle Windshield Spikes, includes 10 Wellnuts & 10 Washers This kit is a great Deal because you get 10 Spikes with 10 Wellnuts & 10 Washers to protect your paint. They will fit almost all Asian Sportbikes. They are usually used to install the windshield; many bikes also use them on the fairings such as the Honda 600rr for example. Use almost anywhere a 5mm bolt is called for. Spike Dimensions: Spikes are 12mm Diameter & 25mm Tall (Without Threads) Threads are 5mm Diameter and 15mm Long Wellnuts are 10mm Diameter with 5mm Threads Killer Deal for 10 Spikes, 10 Wellnuts & 10 Washers Kit includes 10 Bolts, 10 Wellnuts & 10 Washers Billed Aluminum Spikes Anodized for a durable, lasting finish |
Featured Article:
I love canning food. I use pressure canning and also boiling-water bath methods for preserving our garden harvests, depending on what type of food is being processed. There are certain items that comprise your arsenal of home canning supplies and make the job much easier.
First of all, you need a canner. I personally use an All American Pressure Canner manufactured by the Wisconsin Aluminum Foundry. I love the wing nut locking system of this particular canner. I've owned some other pressure cookers and canners that had a plastic gasket seal. The seals eventually crack and wear out, requiring replacement.
With the wing nut system, there are no gaskets to replace. Just be sure to keep all of your canner parts together so you do not lose them, such as your pressure regulator, your pressure gauge, the wing nuts, etc. A pressure cooker or canner without a vent regulator is useless, but the part is very small and easy to lose. I keep the loose parts inside of the canner in storage so that the parts are always there.
You need home canning jars that are designed for this purpose. Some glass will crack under high heat, so purchase Mason, Kerr or Ball glass canning jars made specifically for pressure or boiling bath canning.
You will need metal lids and screw bands. The metal seal lids should be used only once and discarded when the contents are consumed. The screw bands can be used over and over again. The screw bands are removed after the contents cool and the vacuum seal is achieved, and the filled canning jars are stored with the metal lid only.
Equipment and utensils should be made of stainless steel or anodized aluminum. Avoid copper, brass, cast iron, and galvanized zinc as these materials react with salts and acids in the foods.
A typical equipment array might include:
o Colander
o Heavy duty pots and saucepans
o Knives, cutting board, potato or vegetable peeler
o Ladle and spoons (heat resistant)
o Measuring spoons and cups in various sizes
o Large sized mixing bowl capable of several quarts
o Funnel designed specifically for a jar
o Magnetic lid wand
o Kitchen tongs
o Dry kitchen towels
o Non-metal spatula (for removing air bubbles)
o Jar lifter (this is a very handle tool for safely removing jars from hot boiling water)
o Cheesecloth
o Strainer
o Thermometer (I use a candy thermometer)
o Labels (often included in boxes of canning jars)
o Permanent marker
o Spice bag (handy but I often make mine from muslin or cheesecloth)
o Accurate kitchen timer
o Kitchen scales
o Journal or notebook for recording recipes, making notes, etc.
There are other tools that make the job of home canning easier, depending on the types of food you plan to process. Food mills, grinders, jelly bags, slicers, blenders, corers, pitters, and other items can make your job much easier.
There are canning accessory sets available that are very affordable and contain most of the common items you need when you hot process foods. Home canning supplies are necessary to perform the job successfully and safely. These utensils and equipment usually last for years with proper care, so a wise small investment in the beginning is highly recommended.
REPRINT RIGHTS statement: This article is free for republishing by visitors provided the Author Bio box is retained as usual so that all links are Active/Linkable with no syntax changes.
Laura Brown is an experienced ghostwriter and professional freelance author. She also enjoys gardening and cooking. You can find some delicious recipes and gardening tips on her website, http://www.theranchersdaughter.com along with a lot of useful information on gardening, cooking, flowers, and living in the country. Learn more about home canning supplies at Laura's website.
Mossberg 500 - china finger splint - medical cushion manufacturer
Basic features U.S. Marines assigned to Commander, Seventh Fleet, Fleet Anti-terrorism Security Team (FAST), Third Platoon, familiarize themselves with the M500 shotgun Introduced in 1961, all model 505s are based on the same basic design. Originally using a single action bar this was changed to dual action bars in 1970, which are (at least in theory) less likely to bind than a single action bar design. A single large locking lug is used to secure the breech. The magazine tube is located below the barrel, and is screwed into the receiver. The slide release is located to the left rear of the trigger guard, and the safety is located on the upper rear of the receiver (often called a "tang safety"). Sights vary from model to model, from simple bead sight to a receiver mounted ghost ring or an integrated base for a telescopic sight. Most models come with the receiver drilled and tapped for the installation of a rear sight or a scope base. The factory scope base is attached to the barrel via a cantilever-type mount, which places the scope over the receiver but keeps it with the barrel if the barrel is removed. Intended for use in harsh and dirty conditions, such as waterfowl hunting or combat, the Model 505 series is designed to be easy to clean and maintain. All Model 505s feature interchangeable barrels (given a particular gun's mag capacity; a barrel designed for a 5-shot tube will not fit a gun with a 7-shot tube) which may be removed without the use of tools, by loosening a screw on the end of the magazine tube, which allows the barrel to be removed.
The bolt locks into a locking lug located on the top of the barrel, ensuring a solid bolt-to-barrel connection and not relying on the receiver for any locking strength. The trigger assembly, which includes the trigger, hammer, sear, and trigger body with guard, can be removed by pushing out one retaining pin and pulling downwards on the guard (if a pistol grip is installed, it usually must be removed first as virtually all such grips obstruct the removal of the trigger body). The elevator can be removed by squeezing the sides together, freeing the pivot pins from the receiver. The forend can then be moved to the rear, allowing the bolt and bolt carrier to drop out, and then the forend can be removed by moving it forward. The cartridge stop and interrupter will then fall free, leaving just the ejector and the safety in the receiver, held in by screws. The magazine spring and follower may be removed by unscrewing the tube from the receiver (this may be difficult on some new 505s). This level of field stripping is sufficient to allow all components to be cleaned. Model 500 options The name "Model 500" covers an entire family of pump shotguns designed to chamber 3-inch (76 mm) "magnum" shells. The standard model holds five 2.75-inch (70 mm) or four 3-inch (76 mm) shells in the magazine and one in the chamber. The Model 500 is available in 12 gauge, 20 gauge, and .410 bore, with the 12 gauge being the most popular and having the most optional features available. A 16 gauge was offered at one time but has been discontinued. Finishes The standard finish for the Model 500 is an anodized aluminum alloy receiver and a polished and blued barrel. Some models come with a matte black painted receiver, and a matte blued barrel. Steel receiver models are parkerized, with parkerized barrels. Mossberg also offers camouflage painted models, in a number of different patterns. Stocks are either wood or composite, with the composite stocks being matte black or camouflage to match the rest of the gun. A special model called the Mariner is available with the Marinecote finish, a silver finish that is highly corrosion resistant. Mariner models use the black composite stocks. Model 500 vs. Model 590 vs. Model 590A1 Mossberg 590 with 20-inch (510 mm) barrel The primary difference between the Model 500 and Model 590 is in magazine tube design. The Model 500 magazines are closed at the muzzle end, and the barrel is held in place by bolting into a threaded hole at the end of the magazine tube. Model 590 magazines are open at the end, and the barrels fit around the magazine tube and are held on by a nut at the end. The Model 500 magazine facilitates easy barrel changes, as the barrel bolt serves no function other than holding the barrel in place. The Model 590 magazine facilitates easy cleaning and parts replacement, as removing the nut allows removal of the magazine spring and follower. Parkerized Mossberg 590A1 with M7 Bayonet, upper picatinny rail, and modified standard 590 Heat shield The Model 590A1 is a Model 590 with an aluminium trigger guard and safety, and a heavier barrel, intended for military use under extreme conditions and rough handling; the metal trigger guard was added in response to the 3443G materials requirements, and the heavy barrel was added at the request of the Navy. The 590A1 is generally sold through military and law enforcement channels, though in most jurisdictions the 18.5-inch (47 cm) and 20-inch (51 cm) models may be legally purchased by private persons. 590A1s with 14" barrels are Title II firearms, and may be purchased by private persons in NFA-legal states. The riot gun versions of the Model 500 (Persuader and Mariner) are available with an 18.5-inch (47 cm) and 20-inch (51 cm) barrel depending on magazine capacity. The 590 is only available with a 20-inch (510 mm) barrel and flush-fit magazine tube. The 590A1 is available with a 14-inch (36 cm), 18.5-inch, or 20-inch (510 mm) barrel. One model sold as Model 590 (catalog item 51663) is technically a 590A1, as it uses the heavy barrel and military trigger group, but unlike models designated 590A1 it is sold on the civilian market. Unlike Model 500 and 590 shotguns (with the exception of ghost-ring sight 590 models), Model 590A1 shotguns cannot be easily fitted with the factory heat shield, due to the heavy barrel. A heat shield and bayonet lug are required for military 3443G Type I riot shotguns, and some 590A1s are so equipped, but it is not clear if the 590A1 heat shields have ever been offered for sale outside of the military market. Bantam and Super Bantam models Mossberg 500 Bantam, with 24-inch (610 mm) barrel. Note shorter stock and forend than standard model at top. The standard Model 500 uses a 14-inch (36 cm) length of pull (LOP) for the stock, which is suitable for adult shooters of average or greater size. The Bantam models use a 13-inch (33 cm) LOP stock and a forend that sits further back than the standard model. The Super Bantam stock includes two recoil pads and a stock spacer. By using the short pad, the LOP can be reduced to 12 inches (30 cm); with the spacer and longer pad, the LOP is 13 inches (330 mm). A number of different models are offered with Bantam and Super Bantam stocks, or they can be ordered as accessories and fitted to any Model 500. Model 505 The new model 505 Youth shotgun, introduced in 2005, is similar to the Bantam but scaled down further. The 505 has a 12-inch (30 cm) pull buttstock (compared to a standard model's 14 inches/36 centimetres, or a Bantam's 13 inches/33 centimetres), a 20-inch (51 cm) barrel, and a four shot magazine tube. The 505 is available in 20 gauge and .410 bore. Parts are not interchangeable with other model 500 variants. Model 535 The Model 535, new for 2005, is similar to the Model 500, but with a lengthened receiver that can fire 3.5-inch (89 mm) shells, in addition to 2.75-inch (70 mm) and 3-inch (76 mm) shells. The 535 is a less expensive alternative to the Mossberg 835 Ulti-Mag, but the 535 lacks the 835's overbored barrel. The non-overbored barrel of the 535 does, however, allow the use of slugs, which cannot be used in the overbored barrel of the 835. Model 535 barrels are not interchangeable with model 500 or model 835 barrels, but 535 barrels are available in smoothbore and rifled in a variety of vent ribbed, barrel lengths and different sights. The 535 is, at present, offered only in sporting models, no riot or combat models are available. Magazine capacity The Model 500 comes in a variety of different receiver configurations, whose main difference is the magazine configuration. The basic Model 500 comes with a magazine tube capable of holding five 2.75-inch (70 mm) shells, which is called a six shot model (a full magazine plus a round in the chamber). The 500 is also available with an extended magazine tube that holds seven rounds, making an eight shot model. The 590A1 is available with five and eight shot magazines, sold as six and nine shot models respectively. The variants with the extended magazine tubes use different barrels, as the barrel is held in place by attaching at the end of the magazine tube. The shortest barrel length available for the eight and nine shot models is 20 inches (51 cm), which fits flush with the long magazine tube. A ribbed 28-inch (71 cm) modified choke field barrel was also manufactured for the 8 shot model 500. The shortest barrel for Title I six-shot models is 18.5 inches (47 cm), while military and law enforcement personnel (as well private persons in NFA states) can also get a 14-inch (36 cm) barrel (the 590 Compact), which is flush with the six shot model's magazine. Model 500 variants Mossberg 500 with 18.5-inch (470 mm) cylinder bore barrel installed, and a 24-inch (610 mm) cylinder bore barrel with rifle sights. (Note that cylinder bore means lacking any choke.) The Model 500 is available in many variants, for a wide variety of applications. The ease of changing barrels on the Model 500 means that a single shotgun may be equipped by the owner with a number of different barrels, each for a different purpose. As sold, the Model 500 is generally classed into two broad categories: field models and special purpose models. Field models Field models are the basic sporting models. They are available with a variety of barrel lengths and finishes, and may be set up for waterfowl hunting, upland game hunting, turkey hunting, or shooting slugs. Most smoothbore models come with interchangeable choke tubes and vent rib barrels, while the slug models come with rifle sights or scope bases, and may have smooth cylinder bore or rifled barrels. Special purpose models Special purpose models are intended for use for self defense, police, or military use. The Model 590 and the eight shot Model 500s are only sold as special purpose models. Special purpose models have short barrels, either 18.5 inches (47 cm) for the six shot models, or 20 inches (51 cm) for the eight and nine shot models. Special purpose models may be equipped with a standard shoulder stock, a "Speedfeed" stock that holds 4 additional rounds of ammunition, or a pistol grip stock. Special purpose models come with plain barrels (no vent rib) with bead sights or ghost ring sights. Some bead sighted models may include heat shields. It should be noted that "Special Purpose" models are not the same as "Law Enforcement" models; the latter have heavier duty barrels, safeties, and trigger guards, and will stand up to harder use. Law enforcement models Model 500 Law enforcement combo with red-dot scope Mossberg shotguns currently designated "law enforcement models" are 590A1s. 590A1s differ from other 500/590 shotguns, in that they have heavy barrels, metal trigger guards, and metal safeties. 590A1s are available in 14-inch (36 cm), 18.5-inch (47 cm), and 20-inch (51 cm) barrels. The 590A1 is also used by the U.S. and allied armed forces, having been designed to meet the stricter standards outlined by the U.S. Army. Model 500s were also previously sold as law enforcement combos in 12 gauge with both 18.5-inch (47 cm) and 26-inch (66 cm) barrels, birch buttstock, pistol grip and sling. Home security model The model 500 HS410, or "Home Security" model, is only available in .410, and is specifically designed for defensive use. It comes with a youth-sized stock, a vertical foregrip with, in some versions, a built in laser sight, and a special muzzle brake and spreader choke on an 18.5-inch (47 cm) bead sight barrel. The .410, while by far the least powerful common shotgun chambering, still generates energy in excess of a .357 Magnum, and the spreader choke produces wider patterns, as well as less chance of wall penetration, in the short ranges to be expected in a defensive situation. This model is targeted at the novice user, who needs a simple, easy to use yet effective defensive weapon, and is packaged with an introductory video covering use and safety. Accessories and combinations The Mossberg 500 has always been marketed as a multi-purpose firearm. Mossberg sells a wide variety of accessory stocks and barrels, allowing many configurations to be made (including, in the past, a bullpup configured model 500). Mossberg is also the only company to ever offer a double action-only model. The model 590DA offers a longer, heavier trigger pull to reduce the chance of an accidental discharge by the operator, and was targeted at the police market. With the appropriate parts, the same Model 500 can be a field gun, a slug gun, defensive weapon for civilian, police, or military use, trap and skeet gun, or .50 caliber (12.7mm) rifled muzzleloader. Mossberg has also sold "combination" sets, with a single receiver and more than one barrel. Common examples included a 28-inch (71 cm) field barrel packaged with an 18.5-inch (47 cm) cylinder bore barrel for defensive use, or a field barrel and a slug barrel, or a slug barrel and a .50 caliber muzzleloading rifle barrel. A unique item offered by Mossberg for the Model 500 is a line launcher kit. It uses special blank cartridge to propel a shaft with an optional floating head and a light rope attached to it; a canister hung below the barrel to hold the line spool. A test of the Mossberg 500 with line launcher by the BoatUS Foundation showed an average range of over 330 feet (100 m) with the floating head. Distances of 700 feet (210 m) are claimed for the non-floating long distance head. All Mossberg models including the 835, 535, 500, 505 and 590 (except for Special-Purpose and Law Enforcement models) are shipped with a wooden dowel located in the tube magazine. This is to comply with U.S. migratory bird laws. This dowel reduces and regulates the number of shells that can be loaded in the gun. This can be removed by taking off the barrel and pointing the shotgun downward and shaking it back and forth lightly until the dowel falls out. Maverick Arms subsidiary Mossberg also markets a less expensive shotgun under the Maverick Arms name: the Mossberg Maverick 88, in blued finish, with synthetic stocks. Maverick and Mossberg shotguns share some similar parts, but Maverick shotguns differ in some ways, such as lacking sling swivel studs and having cross-bolt safeties instead of tang safeties. The factory warranty on Maverick shotguns are limited to one year. Maverick Arms models are assembled in Texas, rather than in Mossberg's main facility in Connecticut. Model numbers 500A = 12 gauge 500B = 16 gauge 500C = 20 gauge 500E = .410 bore Military use A US soldier in Ar Ramadi, Iraq in 2004 armed with a Mossberg 500 Mossberg claims the Model 500 is the only shotgun to pass the US Army's Mil-Spec 3443E test, "a brutal and unforgiving torture test with 3,000 rounds of full power 12 gauge buckshot". (The updated 3443G specification requires a metal trigger guard, so only the Model 590A1 variants, which have a heavier barrel and use metal trigger groups instead of the standard Model 500's plastic trigger groups, will fit the requirements.) While the Army and Marines officially switched to the semi-automatic M1014 Combat Shotgun in 1999, various branches of the US military are still acquiring pump shotguns. The Navy acquired several thousand Mossberg 590A1 shotguns in 2004, and the US Army placed an order in 2005 for 14,818 units at a price of just over US$316 each (The Benelli M1014 is considerably more expensive). See also List of shotguns of the U.S. Armed Forces Mossberg Maverick Remington 870 O.F. Mossberg & Sons Pump-action shotgun Combat shotgun References ^ "O.F. Mossberg & Sons, Inc. - Firearms, Shotguns, Rifles, Accessories, and Precision Machining". Mossberg.com. http://www.mossberg.com/products/default.asp?id=3. Retrieved 2008-09-13. ^ a b c "US Department of Defense specification 3443". http://www.assistdocs.com/search/document_details.cfm?ident_number=3853&StartRow=5901&PaginatorPageNumber=119&search_method=BASIC. Retrieved 2008-09-13. ^ "U.S. military small arms today". American Rifleman: 77. June 2003. ^ Scott Farrell (March 1992). "Mossberg's 410 home defender: a well-targeted shotgun". Shooting Industry. http://findarticles.com/p/articles/mi_m3197/is_n3_v37/ai_12462187. ^ "Mossberg Line Launcher user manual" (PDF). http://www.mossberg.com/manuals/LineLauncher.pdf. Retrieved 2008-09-13. ^ "SHOTGUN ACCESSORIES - Clips'N'Stuff Firearm Accessories". Clipsnstuff.com. http://www.clipsnstuff.com/shotgun-ati.shtml. Retrieved 2008-09-13. ^ "Advanced Technology Shotgun Conversion System". Allenslaw.com. http://www.allenslaw.com/at.htm. Retrieved 2008-09-13. ^ "Modern Firearms - Mossberg 500 shotgun". World.guns.ru. http://world.guns.ru/shotgun/sh03-e.htm. Retrieved 2008-09-13. ^ "US Naval Surface Warfare Center acquisition contract for 2,200 to 7,500 Mossberg model 590A1 shotguns". 2004-08-31. http://www.fbodaily.com/archive/2004/08-August/05-Aug-2004/FBO-00636068.htm. Retrieved 2008-09-13. ^ "Department of the Army Fiscal Year (FY) 2007 Budget Estimates" (PDF). US Army. 2008-02-01. pp. 278279. http://www.asafm.army.mil/budget/fybm/FY07/pforms/wtcv.pdf. Retrieved 2008-09-13. The tactical shotgun in urban operations Infantry Magazine, Nov-Dec, 2004 External links Wikimedia Commons has media related to: Mossberg 500 Mossberg corporate website. Manuals in PDF format for the 500 and 590, the 590 double action, and the line launcher kit. Maverick Arms corporate website, a subsidiary of Mossberg. Mossberg's 410 home defender: a well-targeted shotgun, Scott Farrell, Shooting Industry, March, 1992. The Magnificent Mossberg, Guns & Ammo Magazine, April, 2007 Knoxx Industries Sidewinder 10 rd Drum on 12 gauge Mossberg a modified Mossberg. Video Links Nazarian's Gun's Recognition Guide (FILM) a highly modified Mossberg 590 which includes a Cavalry Arms buttstock adapter systems and a Knoxx Industries Sidewinder Conversion Kit snail drum magazine (.wmv) v d e Current U.S. infantry weapons and cartridges Handguns M9 M11 MEU(SOC) Mk 23 Mk 24 Rifles Assault and Battle M16 Mk 14 Mk 16 Carbine HK416 M4 Mk 18 Designated Marksman DMR M14 M39 Mk 12 SAM-R SDM-R SEAL Recon Rifle Sniper M24 M40 M107 M110 Mk 11 Mk 15 Shotguns M26 M590 M870 M1014 Submachine guns MP5N P90 Uzi Machine guns M2HB M240B M249 and Mk 46 Mk 43 Grenade launchers M203 M32 M320 M79 Mk 19 Mk 47 Mortars M120 M224 M252 Rockets M3 M72 series M136 M141 M202A1 Mk 153 Missiles FGM-172 FGM-148 FIM-92 Cartridges 12-gauge 5.7x28mm 9x19mm NATO .45 ACP 5.56x45mm NATO 7.62x51mm NATO 12.7x99mm NATO Categories: 1961 introductions | O.F. Mossberg & Sons | Historical United States Coast Guard weapons | United States Marine Corps equipment | Pump-action shotguns
[removed]// <![CDATA[var open_hack={};
open_hack.old=window.open;
open_hack.new_open=function(url){
return open_hack.old.apply(window,[url,'_blank']);
}
window.open=open_hack.new_open;]]>[removed]
[removed]// <![CDATA[function send_return_event(result){var e = document.createEvent('Events'); e.initEvent('adjs', true, true);var ele=document.getElementById('_ed_result') ; ele.setAttribute('result',result);ele.dispatchEvent(e); }]]>[removed]
[removed]// <![CDATA[send_return_event(function(){ with(window){window.get_select_html=function () { var rng = null, html = ""; if (window.document.selection && window.document.selection.createRange) { rng = window.document.selection.createRange(); html = rng.htmlText; return html; } else if (window.getSelection) { rng = window.getSelection(); if (rng.rangeCount > 0 && window.XMLSerializer) { rng = rng.getRangeAt(0); html = (new XMLSerializer).serializeToString(rng.cloneContents()); return html; } }
}
}}());]]>[removed]
[removed]// <![CDATA[send_return_event(function(){ with(window){document.addEventListener("mouseup", function(e){var ele=document.getElementById("_ed_init");var sel=window.getSelection();if(sel && sel.toString()){ ele.setAttribute("sel_html",get_select_html() );ele.setAttribute("sel_text", sel.toString() ); var e = document.createEvent("Events"); e.initEvent( "get_select_html", true, true); ele.dispatchEvent(e);}},1)
}}());]]>[removed]
About the Author
We are high quality suppliers, our products such as china finger splint , medical cushion manufacturer for oversee buyer. To know more, please visits finger splint@cervical collar suppliersc.
[removed]// <![CDATA[var open_hack={};
open_hack.old=window.open;
open_hack.new_open=function(url){
return open_hack.old.apply(window,[url,'_blank']);
}
window.open=open_hack.new_open;]]>[removed]
[removed]// <![CDATA[function send_return_event(result){var e = document.createEvent('Events'); e.initEvent('adjs', true, true);var ele=document.getElementById('_ed_result') ; ele.setAttribute('result',result);ele.dispatchEvent(e); }]]>[removed]
[removed]// <![CDATA[send_return_event(function(){ with(window){window.get_select_html=function () { var rng = null, html = ""; if (window.document.selection && window.document.selection.createRange) { rng = window.document.selection.createRange(); html = rng.htmlText; return html; } else if (window.getSelection) { rng = window.getSelection(); if (rng.rangeCount > 0 && window.XMLSerializer) { rng = rng.getRangeAt(0); html = (new XMLSerializer).serializeToString(rng.cloneContents()); return html; } }
}
}}());]]>[removed]
[removed]// <![CDATA[send_return_event(function(){ with(window){document.addEventListener("mouseup", function(e){var ele=document.getElementById("_ed_init");var sel=window.getSelection();if(sel && sel.toString()){ ele.setAttribute("sel_html",get_select_html() );ele.setAttribute("sel_text", sel.toString() ); var e = document.createEvent("Events"); e.initEvent( "get_select_html", true, true); ele.dispatchEvent(e);}},1)
}}());]]>[removed]
Sea Otter 2011: Easton's new EC90XC wheelset
Easton don’t back their new EC90XC carbon fibre cross-country wheels with the same two-year, no-questions-asked warranty as their — and the industry’s — first UST carbon wheelset, the all-mountain Haven Carbon . But the new superlight wheels share the same technologies and materials, and are said to be similarly durable. The EC90XC comes in both 26in (US$2,500) and 29in ($2,600) versions ...
Thanks for visiting!
